Special-Purpose Transformers
1 / 1
Representative configuration. The offered model, dimensions and interfaces are confirmed with the technical proposal.
Overview
Entogo supplies Scott-connected transformers for conversion between three-phase and two-phase circuits. Define the two output loads, 90° phase relationship, voltage ratio and operating cycle before selecting the winding design.
Entogo supplies this project equipment through manufacturing partners. Entogo Inc. in Toronto coordinates technical selection, supply scope and order support.
| Specification | Value |
|---|---|
| Connection | Scott T arrangement with main and teaser transformer sections |
| Output phase relation | Two output circuits in quadrature: 90° electrical displacement |
| Winding construction | Separate secondary windings; terminal identification agreed by drawing |
| Reference construction | Dry-type, naturally cooled, open construction; enclosure separately specified |
| Rated duty | Power, power factor and loading specified for each output circuit |
| Balance assessment | Three-phase input balance evaluated against both output loads |
| Frequency and insulation | Supply frequency, winding voltages and insulation coordinated per design |
| Verification | Ratio, polarity, phase relationship and agreed load/test conditions |
Reference configurations and selection criteria are shown together. The technical offer defines the matched ratings, tests and guaranteed performance for the ordered unit.
The Scott connection uses main and teaser sections to create the required two-phase relationship. A single total-kVA value hides how the two outputs will actually be loaded. Give the power factor and operating cycle of each circuit.
Input balance depends on the output loads and connection. Where process loads vary independently, evaluate the relevant operating cases instead of assuming the three-phase supply always remains balanced.
For Canadian and US projects, include the utility specification, service frequency and required approvals. State whether the order is for the transformer alone or an integrated equipment package.
Send your single-line diagram, load or process data, target market and required schedule. We will identify the configuration and documents needed for a technical quotation.
Products
Entogo supplies electrical isolation transformers with separate primary and secondary windings. Select voltage ratio, kVA, shielding, grounding and enclosure for the load; isolation duty and dry-type construction are distinct requirements.
View
Products
Entogo supplies inverter-duty transformers for PV and battery-storage interconnection. Match the inverter/PCS voltage, winding arrangement, grounding, harmonics and thermal duty to the collector network and connection study.
View
Products
Entogo supplies electric-furnace transformers for metallurgical processes. Furnace type, secondary current, voltage range, impedance, tap operation and the complete heat cycle determine the design rather than plant demand alone.
View
Products
Three-phase pad-mounted distribution transformer for North American utility, commercial and industrial service — 75–2500 kVA, 12.47–34.5 kV class primary to 480Y/277 or 208Y/120 secondary, dead-front loop/radial-feed, NEMA 3R. Designed to IEEE C57.12.34 and DOE 10 CFR 431; UL/CSA certifiable.
View
Offline
Our customer support team is currently offline. Please email us with your question or project details.
contact@entogo.ca
Email our team