Transformers & Substations

Overhead Distribution Transformer Set (Pole-Mount Package)

15 kV class · complete pole package

Configure & quote

Customize your Overhead Distribution Transformer Set (Pole-Mount Package) and get a quote.

Configure & get a quote
Entogo overhead pole-mounted distribution transformer complete set with cutout and arrester

Overview

A complete overhead pole-mount distribution package — transformer, fused cutout, lightning arrester, secondary/metering pedestal, jumpers and hardware — engineered to one 15 kV class, 60 Hz spec. Transformer designed to IEEE C57.12.20 and DOE 10 CFR 431; UL/CSA certifiable.

This overhead distribution transformer set bundles everything an overhead service point needs into one pre-engineered, modular package: the distribution transformer, a fused cutout, a lightning arrester, a secondary/metering pedestal, insulated jumpers and the crossarm or cluster mounting hardware — all matched to a single 15 kV class, 60 Hz specification for fast, consistent field installation.

The transformer is designed and built to IEEE C57.12.20 and DOE 10 CFR 431 efficiency; the cutout and arrester are rated to IEEE/ANSI C37.42 and C62.11 for the voltage class. The modular format keeps maintenance and component replacement simple, and the set is configured to each utility’s construction standard. UL / CSA certification is available on request.

Key features

  • Complete, pre-engineered overhead distribution point — transformer, fused cutout, arrester, secondary pedestal, jumpers and hardware in one package.
  • Transformer designed and built to IEEE C57.12.20 and DOE 10 CFR 431 efficiency, 60 Hz — UL / CSA certification available on request.
  • Cutout and arrester rated to IEEE/ANSI C37.42 and C62.11 for the matching voltage class.
  • Modular design simplifies field assembly, maintenance and component replacement.
  • Configured to the utility's construction standard and voltage class.

FAQ

Common questions

What is included in the pole-mount set?
The package bundles the distribution transformer, a fused cutout, a lightning arrester, a secondary/metering pedestal, insulated jumpers and the crossarm/cluster mounting hardware — pre-engineered to one 15 kV class, 60 Hz spec so a complete overhead service point installs consistently.
What voltage class and ratings does it cover?
15 kV class (12.47GrdY/7200, 13.2, 13.8 kV) standard, 25 kV class optional; single-phase transformers 10 – 167 kVA with 120/240 V secondary, or a three-phase pole-bank. All components are 60 Hz and matched to the utility construction standard.

Power Equipment

Related products

Entogo three-phase pad-mounted distribution transformer, dead-front, NEMA 3R enclosure

Power Equipment

Three-Phase Pad-Mounted Distribution Transformer

Three-phase pad-mounted distribution transformer for North-American utility, commercial and industrial service — 75–2500 kVA, 12.47–34.5 kV class primary to 480Y/277 or 208Y/120 secondary, dead-front loop/radial-feed, NEMA 3R. Designed to IEEE C57.12.34 and DOE 10 CFR 431; UL/CSA certifiable.

View

Entogo 36 kV outdoor compact unit substation for renewables and industrial sites

Power Equipment

36 kV Outdoor Compact Unit Substation

A factory-assembled outdoor unit substation — incoming 34.5 / 35 kV switchgear, liquid-filled step-up or step-down transformer (1,000 – 10,000 kVA) and a low-voltage section in one weather-tight enclosure — for solar PV, wind, and industrial interconnection. Built to IEEE C37.121, ANSI C57.12.34 and IEC 62271-202.

View

Entogo amorphous-core high-efficiency dry-type transformer

Power Equipment

Amorphous-Core Dry-Type Transformer (High-Efficiency)

A high-efficiency amorphous-metal-core dry-type transformer with very low no-load loss, low noise and low partial discharge — 30–2500 kVA, medium voltage to 35 kV class stepping to 480/208 V, fire-safe. Designed to UL 1562, CSA C9/C802.2 and DOE 10 CFR 431; UL/CSA certifiable.

View