Power Equipment
Transformers & Substations
Pad-mounted, overhead, dry-type and substation transformers and unit substations — designed to ANSI/IEEE C57 and DOE efficiency for North-American utility-scale and industrial power.
Power Equipment
Three-Phase Pad-Mounted Distribution Transformer
Three-phase pad-mounted distribution transformer for North-American utility, commercial and industrial service — 75–2500 kVA, 12.47–34.5 kV class primary to 480Y/277 or 208Y/120 secondary, dead-front loop/radial-feed, NEMA 3R. Designed to IEEE C57.12.34 and DOE 10 CFR 431; UL/CSA certifiable.
View
Power Equipment
36 kV Outdoor Compact Unit Substation
A factory-assembled outdoor unit substation — incoming 34.5 / 35 kV switchgear, liquid-filled step-up or step-down transformer (1,000 – 10,000 kVA) and a low-voltage section in one weather-tight enclosure — for solar PV, wind, and industrial interconnection. Built to IEEE C37.121, ANSI C57.12.34 and IEC 62271-202.
View
Power Equipment
Amorphous-Core Dry-Type Transformer (High-Efficiency)
A high-efficiency amorphous-metal-core dry-type transformer with very low no-load loss, low noise and low partial discharge — 30–2500 kVA, medium voltage to 35 kV class stepping to 480/208 V, fire-safe. Designed to UL 1562, CSA C9/C802.2 and DOE 10 CFR 431; UL/CSA certifiable.
View
Power Equipment
Modular Skid-Mounted Unit Substation (Step-Up / Collector)
A fully modular, skid-mounted unit substation for renewable collector and step-up (boosting) duty — cutting site footprint ~30% and design/install time ~70%, with cloud-based remote diagnostics. Up to 38 kV class, 60 Hz; designed to IEEE C37.121/ANSI C57.12.34; UL/CSA certifiable.
View
Power Equipment
36 kV Oil-Immersed Power Transformer
A liquid-filled (mineral oil) three-phase power transformer for substation and subtransmission duty in 34.5 / 35 / 36 kV networks, rated 2.5 to 31.5 MVA with ONAN / ONAF cooling, off-circuit or on-load tap changing and copper windings, designed to IEEE C57.12.00 / C57.12.10 and IEC 60076.
View
Power Equipment
Single-Phase Overhead (Pole-Mounted) Distribution Transformer
Single-phase overhead pole-mounted distribution transformers for North-American utility lines — 10 to 167 kVA, 7200 / 12470GrdY / 24940GrdY primary to 120/240 V secondary, conventional or completely self-protected (CSP). Designed to IEEE C57.12.20 and DOE 10 CFR 431 efficiency, 60 Hz; UL / CSA certifiable.
View
Power Equipment
Three-Phase Dry-Type Distribution Transformer
A three-phase ventilated dry-type distribution transformer for indoor commercial/industrial service — 15–2500 kVA, low-voltage 600 V class (480 to 208Y/120) and medium-voltage to 35 kV class, 220 °C insulation. Designed to UL 1561/1562, CSA C9 and DOE 10 CFR 431; UL/CSA certifiable.
View
Power Equipment
Three-Dimensional Wound-Core Transformer (Low-Loss)
A three-dimensional (triangular) wound-core distribution transformer with a closed, symmetric core for lower no-load loss, balanced flux, low noise and high short-circuit withstand — oil-filled or dry-type, 15/25/35 kV class, 60 Hz. Designed to IEEE C57/UL and DOE 10 CFR 431; UL/CSA certifiable.
View
Power Equipment
Combined Pad-Mounted Transformer (Integrated MV Switching)
American-style combined pad-mounted transformer integrating the medium-voltage load-break switch, fuse protection and low-voltage distribution with the transformer in one tamper-resistant tank — 75–2500 kVA, 15/25/35 kV class, 60 Hz. Designed to IEEE C57.12.34/.28; UL/CSA certifiable.
View
Power Equipment
Overhead Distribution Transformer Set (Pole-Mount Package)
A complete overhead pole-mount distribution package — transformer, fused cutout, lightning arrester, secondary/metering pedestal, jumpers and hardware — engineered to one 15 kV class, 60 Hz spec. Transformer designed to IEEE C57.12.20 and DOE 10 CFR 431; UL/CSA certifiable.
View
Power Equipment
Pad-Mounted Compact Secondary Unit Substation
A factory-assembled compact secondary unit substation — incoming medium-voltage switching, distribution transformer (≤2500 kVA) and a low-voltage section in one weather-tight pad-mounted enclosure for 15/25 kV class service, 60 Hz. Designed to IEEE C37.121, ANSI C57.12.34 and IEC 62271-202; UL/CSA certifiable.
View
Power Equipment
Solar / Storage Skid — Inverter-Duty Step-Up Unit Substation
An inverter-duty step-up unit substation (solar/storage skid) integrating a liquid-filled step-up transformer, MV switching and inverter interface — stepping inverter low voltage up to 34.5 kV for PV and battery-storage interconnection, 60 Hz. Designed to IEEE C57.12.34, C57.159 and C37.121; UL/CSA certifiable.
View
Configure & quote
Customize your transformer and get a quote.
More product lines
Explore the rest of the range
-
Switchgear & Distribution
Medium- and low-voltage switchgear, pad-mounted gear and switchboards designed to ANSI/IEEE C37 and UL for safe, reliable North-American distribution.
Explore range
-
Energy Storage
Battery energy storage systems for grid support, peak shaving and renewable-energy integration.
Explore range
-
EV Charging & PV-Storage-Charging
AC/DC charging infrastructure and integrated photovoltaic-storage-charging systems.
Explore range