Switchgear & Distribution

CT Metering & Distribution Cabinet (Pedestal)

≤ 600 V · 400 – 1200 A

Entogo CT metering and low-voltage distribution pedestal cabinet

Overview

A combined CT-metering and low-voltage distribution cabinet for utility and tenant service points — current-transformer metering, outgoing breakers and optional power-factor correction in one outdoor NEMA 3R pedestal, ≤600 V, 60 Hz. Designed to UL 414, UL 50/50E and UL 891; UL/CSA certifiable.

This combined CT-metering and low-voltage distribution cabinet brings current-transformer metering, outgoing distribution breakers and optional power-factor correction into one weatherproof service-point enclosure. Where North America often separates the meter, distribution and compensation functions, this unit consolidates them — a compact choice for utility and tenant service points at ≤ 600 V, 60 Hz, rated 400 to 1200 A.

The CT metering compartment follows ANSI C12.7 with utility-accessible sealing, and the NEMA 3R enclosure (4X stainless for coastal or corrosive sites) is pedestal- or pad-mounted near the service transformer. Designed and built to UL 414 (metering), UL 50 / 50E (enclosure) and UL 891 (distribution), with UL (cULus) / CSA certification available on request.

Key features

  • Integrates current-transformer metering, outgoing distribution and optional power-factor correction in one weatherproof service-point cabinet.
  • Designed and built to UL 414 (metering), UL 50 / 50E (enclosure) and UL 891 (distribution), 60 Hz — UL (cULus) / CSA certification available on request.
  • 400 – 1200 A, ≤ 600 V; CT metering compartment per ANSI C12.7 with utility-accessible sealing.
  • NEMA 3R weatherproof enclosure (4X stainless for coastal / corrosive sites), pedestal- or pad-mounted near the service transformer.
  • Compact alternative to separate meter, distribution and compensation enclosures.

FAQ

Common questions

Does North America use an all-in-one distribution box like this?
North America typically separates these functions — a CT cabinet / meter enclosure plus a distribution panel — but they can be combined in one pedestal/pad cabinet. This unit integrates CT metering, outgoing distribution and optional power-factor correction to UL 414 / UL 891.
What metering and ratings are supported?
Current-transformer (CT) metering per ANSI C12.7, 400 – 1200 A, ≤ 600 V, 60 Hz, in a NEMA 3R (or 4X stainless) enclosure. UL (cULus) / CSA certification available on request.

Distribution

Related products

Entogo metal-clad medium-voltage switchgear with drawout vacuum circuit breakers

Distribution

Metal-Clad Switchgear (Drawout MV)

Metal-clad medium-voltage switchgear with drawout vacuum circuit breakers for 5/15/27/38 kV class systems, 60 Hz — compartmentalized, insulated-bus construction up to 4000 A and 50 kA, with optional arc-resistant rating. Designed to ANSI/IEEE C37.20.2; UL/CSA certifiable.

View

Entogo dead-front low-voltage switchboard, UL 891 type

Distribution

Low-Voltage Switchboard (UL 891)

A dead-front low-voltage switchboard for ≤ 600 V, 60 Hz service-entrance and distribution — up to 6000 A and 200 kA, with group-mounted molded-case or insulated-case breakers, for commercial, institutional and industrial buildings. Designed to UL 891; UL (cULus) / CSA certifiable.

View

Entogo pad-mounted ring main unit load-break switchgear, dead-front

Distribution

Pad-Mounted Switchgear (Ring Main Unit)

Pad-mounted load-break switchgear (ring main unit) for underground medium-voltage distribution — 15/25/38 kV class, 200/600 A, dead-front, with SF6 or SF6-free fault-interrupting ways for utility loops, campuses and data centers, 60 Hz. Designed to IEC 62271-200 and ANSI C57.12.28; UL/CSA certifiable.

View

Request a quote

Talk to engineering about the CT Metering & Distribution Cabinet (Pedestal).

Start an inquiry